Tutorials and How To...
Through step-by-step lessons written by recognized experts in their fields, PROCAD's how-to courses and tutorials can help you master the techniques you need to become more productive with CAD products and solutions.
TRACKING (Command Modifier) Command
Locates a point from a series of temporary points
Command entry: At a prompt to locate a point, enter tracking
Tracking turns on Ortho mode and can be used with Snap mode.
At any prompt to locate a point, enter tracking, track, or tk.
First tracking point: Specify a location or distance
Next point (Press ENTER to end tracking): Specify a second location or distance
Tracking specifies a series of temporary points, each offset from the previous one. Thus, you specify a new point location from a series of directions and distances. To determine the location of each temporary point, you can use direct distance entry. First move the cursor to specify the direction, and then enter a numeric distance.
Alternatively, tracking can establish a new point by combining the X and Y values of two specified points. You can specify these two points in any order, depending on the cursor direction after the first point. Direct distance entry specifies a distance in the direction of the current location of your cursor. Coordinate filters combine X, Y, and Z values from different points into a single point. Relative coordinate entry locates a point relative to the last point entered.
You can also access tracking by holding down SHIFT and right-clicking to display the object snap shortcut menu.
Track to Points on Objects
(Object Snap Tracking)
You can draw objects at specific angles or in specific relationship to other objects along specified directions called alignment paths.
AutoTrack™ helps you draw objects at specific angles or in specific relationships to other objects. When you turn on AutoTrack, temporary alignment paths help you create objects at precise positions and angles. AutoTrack includes two tracking options: polar tracking and object snap tracking.
You can toggle AutoTrack on and off with the Polar and Otrack buttons on the status bar. Use temporary override keys to turn object snap tracking on and off or to turn off all snapping and tracking. See the keyboard illustration in Override Object Snap Settings.
Object snap tracking works in conjunction with object snaps. You must set an object snap before you can track from an object's snap point.
Object Snap Tracking
Use object snap tracking to track along alignment paths that are based on object snap points. Acquired points display a small plus sign (+), and you can acquire up to seven tracking points at a time. After you acquire a point, horizontal, vertical, or polar alignment paths relative to the point are displayed as you move the cursor over their drawing paths. For example, you can select a point along a path based on an object endpoint or midpoint or an intersection between objects.
In the following illustration, the Endpoint object snap is on. You start a line by clicking its start point (1), move the cursor over another line's endpoint (2) to acquire it, and then move the cursor along the horizontal alignment path to locate the endpoint you want for the line you are drawing (3).
Change Object Snap Tracking Settings
By default, object snap tracking is set to orthogonal. Alignment paths are displayed at 0, 90, 180, and 270 degrees from acquired object points. However, you can use polar tracking angles instead.
For object snap tracking, object points are automatically acquired. However, you can choose to acquire points only when you press SHIFT.
Change Alignment Path Display
You can change how AutoTrack displays alignment paths, and you can change how object points are acquired for object snap tracking. By default, alignment paths stretch to the end of the drawing window. You can change their display to abbreviated lengths, or no length.
Tips for Using Object Snap Tracking
As you use AutoTrack (polar tracking and object snap tracking), you will discover techniques that make specific design tasks easier. Here are a few you might try.
Use Perpendicular, End, and Mid object snaps with object snap tracking to draw to points that are perpendicular to the end and midpoints of objects.
Use the Tangent and End object snaps with object snap tracking to draw to points that are tangent to the endpoints of arcs.
Use object snap tracking with temporary tracking points. At a point prompt, enter tt, then specify a temporary tracking point. A small + appears at the point. As you move your cursor, AutoTrack alignment paths are displayed relative to the temporary point. To remove the point, move the cursor back over the +.
After you acquire an object snap point, use direct distance to specify points at precise distances along alignment paths from the acquired object snap point. To specify a point prompt, select an object snap, move the cursor to display an alignment path, then enter a distance at the Command prompt.
Note The direct distance entry method is not available while you are using the temporary override key for object snap tracking.
Use the Automatic and SHIFT to Acquire options set on the Drafting tab of the Options dialog box to manage point acquisition. Point acquisition is set to Automatic by default. When working in close quarters, press SHIFT to temporarily avoid acquiring a point.